Categories
Roadside Assistance

It sounds completely absurd: it's -10°C outside, you're cruising down the highway, and suddenly clouds of white steam billow from under the bonnet, while the temperature gauge pins itself to the 120°C red zone. Your engine has overheated in freezing temperatures.

How is it possible to boil an engine in winter, and why is neglected antifreeze density the prime suspect?


What Happens When Antifreeze Is Too Weak?

Many drivers top up their cooling system with plain distilled water during the summer after a minor leak, thinking: "I only added half a jug; it'll be fine by winter." However, by diluting high-quality concentrate with water, its freezing point can easily rise from a safe -38°C to a dangerous -5°C or -8°C.

Unlike pure water, which freezes into a solid block of ice, diluted antifreeze turns into a thick slush of ice crystals (a gel):

  • When driving at 90 km/h, the icy headwind creates an additional 5-10 degrees of cooling effect within the radiator fins.
  • The narrow aluminium radiator tubes instantly clog with this icy sludge.
  • Circulation grinds to a halt. The water pump cannot force the thick mass through the frozen radiator, and the coolant remaining in the engine block boils within minutes.
The worst-case scenario: Expanding ice can burst the plastic side tanks of your radiator, push out engine core plugs (freeze plugs), or even crack the cast iron engine block itself. Never open the coolant reservoir cap while the engine is boiling-scalding steam can cause severe burns to your face and hands!

Have your antifreeze freezing point checked at any workshop using an optical refractometer (it should be at least -35°C). If your system is already frozen, do not attempt to run the engine-call our professional car towing service in Riga to safely transport your vehicle to a warm garage for thawing.